by ListerStormGT » Tue Apr 30, 2013 7:38 pm
slothead, I cheated a little on this one as it was a white kit and I just sanded the gloss coat off and then taped off the areas I wanted to keep white.
For yours since it is a resin body, I normally do a light sanding, then clean with Westley's bleach-white tire cleaner. After the body is clean and dry I would primer it and you will want to do a base coat of the white color you want, once dry tape off the body and paint the sides red, once dry tape off the sides and the the areas you want to keep white and paint the top blue.
For tape I use 1/4" green automotive masking tape like they use in auto body paint shops. The trick to get a clean edge is to do a few light coats and peel away the tape before the paint fully cures. I am no professional but that is how I would do the 3 step paint process if I were doing it. Look forward to seeing it when you start on it.