by Audi1 » Wed Sep 17, 2014 6:29 pm
OK, thanks for the clarification. I guess I was interpreting that all body parts must have 0.062 clearance; except the spur on crown gears.
With the understanding that the body wheel wells can not be below the upper rim of the wheel, is there a minimum track clearance height for the tracks that we'll run on in this proxy? I ask because on wood tracks with copper tape rails, I've gone as low as 0.020" (0.5mm), but usually on something like Carrera track, with its raised rails, I don't go lower than 0.039" (1.0mm).
Audi1