by SRQSloter » Sat Jul 19, 2014 6:46 am
Dave, Suggestion. Cut the tube and wire for the pans a 1/2" or so long you don't need all that extra weight. And on the cross piece to your pans put a piece of brass under there so the wire lays flat. And be sure not to get your pans up against the tubing to tight. You'll loose your movement. Don't need a lot movement like Marty said either. Looking good though. :handgestures-thumbup:
Another thing is. You don't need to use .062 wire on the pans either. Using .046 or .055 will be strong enough when use shorter lengths. Again less weight to put weight where you need it. :D