Impulse-ive's Twin Falls Raceway

[Impulse-ive]

Finished the braid and tested a couple cars with a 9v battery

[Impulse-ive]

I added a Stainless steel facia and started building a skirt out of bags I get at San Diego ComicCon every year.

[Impulse-ive]

I started using some white PVC board to make walls behind the rails then started laying out a pit lane. this was strictly because I had no idea how to do landscaping and wanted to do less.

[Impulse-ive]

The same PVC board was used to make a face of the pit stalls.

[Impulse-ive]

I added some paint and a fascia over the pits for banners.

[Impulse-ive]

After a testing and rubber in day the guys gave me suggestions for driving improvements to the track I changed some bankings and elevations.

[Impulse-ive]

I ran it this way for months just delaying having to start landscaping.

[Impulse-ive]

Still putting off landscaping I started putting up advertising.

[chappyman66]

Still hoping to see the pictures...

[Impulse-ive]

Then painted the lanes...again delaying landscaping :hand:

[Impulse-ive]

bought some trees...getting ready to bite the bullet

[Impulse-ive]

Then I stapled some screen door screen into the gaps, covered it in plaster cloth and glues the grass powder in. this was waaaaay easier than I thought.

[Impulse-ive]

I started added some trees and taking a crack at making cliffs

[Impulse-ive]

[Impulse-ive]

I made some changes to the cliffs because it felt too much like a wall.