Page 1 of 11

Palmer Divide Raceway (PDR) v3.0 Updated 02/18/2015

PostPosted: Sat Jun 28, 2014 3:22 pm
by dreinecke
After moving and having to tear down the PDR v2.5 (2nd track, 1 half revision), I've been slowly putting the bench work back together, prepping the track surface for new paint and tape, and trying to figure out what to do with the section I had to shorten by 2 feet to fit into the new basement.

I've alternated between wanting something quick, banked or curvy. The old version was very kinked in this location and really slowed cars down and was also heavily squeezed. I decided to open things up a bit by keeping 3" lane spacing through here and am making a simple and quick section since it is at the end of the long straight and connects to the Start/Finish line. It gives me a few more scenic opportunities (particularly with more paddock space!) and more sliding area in the corner.

So today I finally had an hour to do some more work! Looks about as rough as I-25 through Denver, but it will all work out when done. I'll get the routing done tomorrow and on to the painting!

More to come!

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sat Jun 28, 2014 3:23 pm
by dreinecke
Image

Image

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sat Jun 28, 2014 3:40 pm
by SRQSloter
Nice addition David. It'll hard on the brakes at the end of the straight on that inside lane. Like that. :handgestures-thumbup:

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sat Jun 28, 2014 4:42 pm
by dreinecke
With AC, there are no brakes :mrgreen: Now you know why there is a slight kink in the 20' long stretch.

A few more as I play with elevations. I'm going to go much milder this time as Castle Rock is really more rolling hills than cliffs. I think I have them fairly close except for the new section since I need to route it.

Image

Image

Image

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sat Jun 28, 2014 5:01 pm
by Ember
Always love your track work David. Good to see the rebuild started.

I'd put in more elevation, but I've never been on the level.

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sat Jun 28, 2014 5:07 pm
by btaylor
If I could have space for a road course,it would look like that! that is one cool track! :mrgreen:

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sat Jun 28, 2014 8:53 pm
by Dundee Denny
Hi Dave!

That track looks huge!!!

How many feet are you going to be running on??

I too, have taken a front row seat, ready to watch you do your magic!!

Dundee Denny

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sat Jun 28, 2014 11:19 pm
by dreinecke
Thanks, I'm happy to finally start working on this again. Can't wait to get back to the scenery.

Dundee - this is still the same track I had, just took out about 5 feet of lap length. It is about 85' now.

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sat Jun 28, 2014 11:34 pm
by baford1
David PDR has always been such a cool looking track it will be nice to watch it all come back together again .

Richard

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sat Jun 28, 2014 11:38 pm
by HomeRacingWorld
This is great to see David, hopefully this one gives you all you want and more.

Need a hand? I can sweep?

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sun Jun 29, 2014 12:13 am
by ListerStormGT
Dave, glad to see you finally having time to get going on the track again. It looks great as always and I like the new section you came up with. I still think you should do the Nürburgring Karussel corner there... :lol:

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sun Jun 29, 2014 11:07 am
by SpeedyNH
hey Doctor,
congrats!
-and I hope you moved away from the Fires!
speedy

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sun Jun 29, 2014 8:45 pm
by dreinecke
Thanks guys, I'm seriously stoked to get this thing running again!

Managed to get the routing done today - wow! Haven't done that in awhile lol!

I ended up putting in a slight bend to keep it from getting too linear looking. And yes the cars can pass... Just barely ;)

Image

Speedy - thanks - we are a little further away now.
Image

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sun Jun 29, 2014 10:05 pm
by ListerStormGT
Looking good man!, I really like that little bend you put in there too. That will give it a nice transition into the corner by the pits. :text-bravo:

Re: Palmer Divide Raceway (PDR) v3.0

PostPosted: Sun Jun 29, 2014 10:08 pm
by dreinecke
I hope so!

I just realized all of my pencil and sharpie marks make it look like I really hosed the lines when routing. Not so, they actually turned out good with nary a jiggle!