by turbokev » Sun Jan 18, 2015 4:45 pm
The table is an odd size to use 4x8 sheets..2 sheets of MDF can do it with a couple seams, 3 would be better.
Three parts that are 5 x 4 and the leftovers could be used for shelves or to trim the edge of the table..
Sheets of 3/8 MDF are about 21 dollars each here.. particle board is much cheaper, but I wouldn't use it myself.
I'm sure it 'could' be used with sealers and sanding etc, but MDF is smooth, easy to route, doesn't suck up and swell
the paint when you paint the grooves or surface.. You should be able to build re-surface and paint it for $50 - $75
depending on if you use 2 or 3 sheets..