Page 1 of 1
Widowmaker Raceway
Posted:
Sun Jan 22, 2017 7:42 pm
by Drewbert34
Just getting started about 3 months ago. For now I'm working with a spare bedroom with an in the floor layout. I've got a little more room for track but not much room for more than 2 racers.20170122_203132.jpg20170122_203227.jpg20170122_203217.jpg
Sent from my SM-J700P using Tapatalk
Re: Widowmaker Raceway
Posted:
Sun Jan 22, 2017 7:43 pm
by Drewbert34
More pics:
20170122_203146.jpg20170122_200655.jpg20170111_214909.jpg
Sent from my SM-J700P using Tapatalk
Re: Widowmaker Raceway
Posted:
Sun Jan 22, 2017 7:45 pm
by Drewbert34
20170114_121016.jpg20170111_200742.jpg
Sent from my SM-J700P using Tapatalk
Re: Widowmaker Raceway
Posted:
Sun Jan 22, 2017 8:49 pm
by HomeRacingWorld
Well you are doing pretty good from my view.
Re: Widowmaker Raceway
Posted:
Wed Jan 25, 2017 10:26 am
by TuscoTodd
Looks like a LOT of fun!!!
Re: Widowmaker Raceway
Posted:
Fri Jan 27, 2017 4:41 pm
by Drewbert34
Re: Widowmaker Raceway
Posted:
Fri Jan 27, 2017 6:14 pm
by chappyman66
Nice job. Looks like it would be fast and fun.
You have good tuning tools, you will be neck deep in no time!
Re: Widowmaker Raceway
Posted:
Sat Jan 28, 2017 6:51 pm
by Drewbert34
Track updates
20170128_182345.jpg20170128_182325.jpg20170128_182247.jpg
Sent from my SM-J700P using Tapatalk
Re: Widowmaker Raceway
Posted:
Sat Jan 28, 2017 6:53 pm
by Drewbert34
Next I'll need to add some fencing and finish off boarders. Hopefully I'll get around to some more buildings and such.
20170128_182206.jpg
Sent from my SM-J700P using Tapatalk
Re: Widowmaker Raceway
Posted:
Sun Feb 05, 2017 11:00 am
by Drewbert34
20170205_115529.jpg
Finally found a good use for those quarter circle boarders we all have by the dozens.
Re: Widowmaker Raceway
Posted:
Thu Feb 09, 2017 4:35 pm
by Drewbert34
Delete
Re: Widowmaker Raceway
Posted:
Thu Feb 09, 2017 5:00 pm
by Drewbert34
Re: Widowmaker Raceway
Posted:
Fri Feb 10, 2017 6:34 am
by TuscoTodd
Great to see the additional details being added! :)
Re: Widowmaker Raceway
Posted:
Fri Feb 10, 2017 6:55 am
by Drewbert34