Page 1 of 2
Roller Test Bench
Posted:
Tue Jan 30, 2018 8:16 am
by HomeRacingWorld
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 8:36 am
by chappy
I have an original, prior to the amp meter. It is a great tool , and when used with a variable power supply works great.
It shows hpw the mptpr is running , how the wheels are rounded and the gearing and tire size can be spec for final rpm. Also great for break in under load.
I suspect this new version is just that much better.
Another great little tool for the bench.
Bob
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 10:02 am
by dw5555
States for 1/32 cars. It looks like it would hold a 1/24 car. Anyone know?
Dave
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 10:09 am
by Racie35
It just sits there and spins the wheels? Doesn't measure anything? Besides volts coming in?
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 10:27 am
by SlotCarCorner
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 10:36 am
by chappy
Yep what he said and then some. Very nicely built unit.
Bob
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 11:02 am
by scatman
Well, Always like to support my hobby, just bought one.
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 11:49 am
by SlotCarCorner
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 11:53 am
by Smokeio
This is the first thing I go to after I build a car. I like the fact that the roller has some weight to it so you can measure the rear tire speed under a simulated loaded condition. Great tool to have.
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 11:54 am
by SlotCarCorner
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 12:07 pm
by HomeRacingWorld
He took mine I bet. Anymore ready?
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 12:17 pm
by SlotCarCorner
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 12:18 pm
by waaytoomuchintothis
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 1:10 pm
by Jesla
Way to go Wayy!
Re: Roller Test Bench
Posted:
Tue Jan 30, 2018 9:21 pm
by TuscoTodd
Blink, blink, blink...
That is VERY cool!!!!
:music-rockout:
Just took a measurement on my 1/24 builds that I have been doing... Any chance there might be a version available/coming that would allow for another 1/2" of distance from the leading edge of the guide to the center of the roller?
(my current longest build has a 5.625" leading edge to center of rear axle)
:pray: