Re: P-BOP cars stop over for a little street racing!
Posted: Fri Mar 27, 2015 1:22 pmTodd, what kind of shutdown length do you use at that track?
Bob
Bob
Home Racing World
Your Slot Car Home On the Net!
http://www.homeracingworld.us/
P-BOP cars stop over for a little street racing!
Page 3 of 3
Posted: Fri Mar 27, 2015 1:22 pmRe: P-BOP cars stop over for a little street racing!
Posted: Fri Mar 27, 2015 2:02 pmIf you use the same system to eliminate cars in the drag class, you could draw the line at 1/4 mile (1/32 scale), and just have a judge eyeball the winner, perhaps with a slo-mo camera. We wouldn't need times for the drags, maybe just for the LSR. I like the idea of a scale 1/4 for the drags.
Re: P-BOP cars stop over for a little street racing!
Posted: Fri Mar 27, 2015 2:03 pmNo shut down length, just a very big pillow, eh? :lol: :lol: :lol:
Re: P-BOP cars stop over for a little street racing!
Posted: Fri Mar 27, 2015 2:05 pmBob - that is a good question! :think:
I am not sure of the length of the shut down - but it is comprised of shorted braid with a glued track surface. There are foam blocks at the end as a safety but I haven't seen a 1/32 car get anywhere near that. :)
(for reference, our Spec Drag cars which are going through the traps at 35+ mph only make it about half way through the shut down area before stopping)
I am not sure of the length of the shut down - but it is comprised of shorted braid with a glued track surface. There are foam blocks at the end as a safety but I haven't seen a 1/32 car get anywhere near that. :)
(for reference, our Spec Drag cars which are going through the traps at 35+ mph only make it about half way through the shut down area before stopping)
Re: P-BOP cars stop over for a little street racing!
Posted: Fri Mar 27, 2015 2:17 pmRetro -
We will have to check into the viability of a "1320" line - but depending on how many cars we get, and how close they are in performance - it might not be practical.
(especially with using the common launch)
For now I would figure on 1760 for the first venue to be safe... :)
(we are exploring a second venue in Akron,OH that may have alternate capabilities - but at this time, I don't have the full details on that track)
We will have to check into the viability of a "1320" line - but depending on how many cars we get, and how close they are in performance - it might not be practical.
(especially with using the common launch)
For now I would figure on 1760 for the first venue to be safe... :)
(we are exploring a second venue in Akron,OH that may have alternate capabilities - but at this time, I don't have the full details on that track)
Re: P-BOP cars stop over for a little street racing!
Posted: Fri Mar 27, 2015 3:03 pmYes, my question was for the same reason. Might be able to build a track myself. just didn't know how much room was needed for shutdown. I am cool with the pillow idea!
Bob
Bob
Re: P-BOP cars stop over for a little street racing!
Posted: Fri Mar 27, 2015 8:55 pmI will try to remember to get some measurements when I am up there this Wednesday guys - but my guess is that it is in the 15ish foot range... :)
Oh - and I think you will definitely want some shut down area at the end before impacting anything - even if it is something as soft as foarm or a pillow as the cars will be traveling 20-35 mph depending on the class / motor / gearing and that straight into anything is going to result in some carnage I would think... ;)
Oh - and I think you will definitely want some shut down area at the end before impacting anything - even if it is something as soft as foarm or a pillow as the cars will be traveling 20-35 mph depending on the class / motor / gearing and that straight into anything is going to result in some carnage I would think... ;)
Re: P-BOP cars stop over for a little street racing!
Posted: Sat Mar 28, 2015 2:02 am1/32 scale drag chutes, anyone?
Re: P-BOP cars stop over for a little street racing!
Posted: Sat Mar 28, 2015 6:21 amNow that would make for some impressive looking video action!
:handgestures-thumbup:
:handgestures-thumbup: