by Audi1 » Sat Feb 13, 2016 3:53 pm
OK, that's 3 more, so we only have 24 left to hear from.................
Bill, you might want to check that the chassis is straight, if not, then heat-straighten it, glue the spherical rear axle bushings in place with CA glue, check for float on the pod, put grub screws in the top and bottom front axle carriers, change the braid, see if a Piranha motor might be a better option than the S can that came with the car (if not an AW Flat 6 set-up), have a look at the gearing, consider a cut-down wood guide, perhaps a lexan interior tray...............and a bunch of other little things................. :lol:
Allan