painted driver head and tray for the 356 Porsche.
waiting for the wheel insert to arrive, than it can be finished. chassis will need a little weight, due to the narrow track it has a tendency to barrel roll when goint into the corners too fast.
searching for the right wheel inserts for the Rambler Marlin, in some way the wheels do not look correct on this car. will try inserts ...
and the vac-formed Chevrolet Astro needed new tires on the rear, one old one melted away.
also played around with the setup of the car.
the wheel base is really short and the distance from the guide to the front axle is short, too.
in combination with no weight at all, the short gearing gave it a very tricky driving.
i ended up with adding weight, fishing tackle putty, 5g on each side of the motor, a total of 10g. Driving was better, but still not totally right. unplugged the brakes - this did the trick.
now it´s fun to run it aroung the track. did not time it, but now it is fun to run.
maybe will do the same to the Rambler.