by Audi1 » Thu Dec 28, 2017 2:50 pm
OK, so a little more thinking. Here's sort of a spec list for the series; not rules yet - just for comments at this point:
Cars - any car that ran in one or more Can-Am races from '66 to '74
1. Body - Plastic Injection Molded, resin or 3D printed bodies
2. Chassis - any material / podded or non-podded
3. Wheels - any - maximum dimensions of 15x8 for both front and rear
4. Tires - any - rubber or urethane - maximum width (shoulder-to-shoulder) 10mm
5. Motor - any - 22k rpm or less based on manufacturer's spec / IL, SW, AW all OK, long or short can
6. Gearing - open
7. clearance - 1.0 mm minimum
8. No tires or guide flags visible from the top of the car
9. Interior - any (lightweight OK) - 3D driver's head, arms, hands, and steering wheel top/dash
10. Glass - any (Lightweight OK) - must be present for closed cars on windshield and rear window
One entry per person
Unique numbers required
Maximum number of cars - 25-30; depending on the number of racers who want to participate (goal will be to not exclude anyone who wants to race)
Cost/car = $20.00
Due date = May 1, 2018
Format - 8 races / routed wood tracks - 4 in the US / 4 in Canada
One class; all cars race together
How is that looking to everyone?
Allan