Round 1 Pioneer Endurance Proxy

Round 1 Pioneer Endurance Proxy

Postby midagekid1 » Fri Apr 20, 2018 11:38 pm

Welcome to Round 1 of the Pioneer Endurance Proxy held at the beautiful 90 foot GETCARS Oil City Slot Car track in beautiful Edmonton Alberta Canada. The temperatures were perfect as well as the track conditions. Cars and drivers arrived early to get ready for this inaugural historic race. The following pictures are of this beautiful venue.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

The cars are finally allowed out on the track for group pictures. Stock qualifiers were allowed out first in order of finish

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Next the Modified qualifiers were allowed in order of qualifying finish.

Image

Image

Image

Image

Image

Image

Image

Radarek's car finally arrived for the Modified Class

Image

Image


Proxy drivers arrive at their stations and the first round of cars are on the track for the start of this historic event.

Image

Image

And they are off!!!!

Image

Round 1 Results

After a heated battle and some surprises, the following is the results of Round 1 in the Stock Class.. Racing data for each lane will be posted tomorrow for both classes.

STOCK CLASS RESULTS.

POSITION CAR LAPS POINTS

1 #21 IDLE TIME RACING 86.3 13
2 #13 BEAST LEE 85.5 12
3 #18 RACER 944 84.9 11
4 #8 8WHEELS 84.3 10
5 #15 MIDAGEKID1 (STOCK) 83.3 9
6 #37 TIN_INDIANS 81.9 8
7 #14 RACER944 80.5 7
8 #25 SLOT GT 80.3 6
9 #1 ARROLDN 79.7 5
10 #66 DEWMAN51 78 4
11 #35 ALOHA 77.9 3
12 #77 DIGITAL SPRINGER 76.5 2
13 #62 PEPSI 62 23.5 1

There was plenty of heated action between these 13 cars and surprises in the stock class: #62 (Pepsi 62) had one successful heat with 16 laps and only 7 laps in the second heat due to a rear wheel malfunction which took it out of the entire race. There was major disappointment from the entire team as this car had finished qualifying in the top cars. Repairs will be completed as the team is eager to battle again for the next race. Car #1 (Arroldn) suffered front end damage but was able to continue the race. Crews report that the damage is minimal and the car will be race ready soon. Car #37 (Tin_Indians) also suffered a loose rear wheel but was able to continue on and finish in 6th place. Again repairs will be made to get this car race ready. The #77 (Digital Springer) Santa Car spread plenty of joy for the entire race and all drivers got on the 'good list' for participating.

NOTE: As in most other proxies, the team's worst race will be taken off when the entire race season is completed.

Image

Image


MODIFIED CLASS RESULTS

POSITION CAR LAPS POINTS

1 #15 MIDAGEKID1 92.3 6
2 #27 RADAREK 92.1 5
3 #17 SWEETPEA 91.6 4
4 #79 ARROLDN 90.3 3
5 #33 BRUMOS 87.6 2
6 #7 8WHEELS 41.6 1


In the modified class the results were surprising as compared to the qualifying rounds. The only race team to have major problems was the #7 Camaro (8Wheels) which suffered a loose front wheel on the third heat which took it out for the rest of the race. Repairs will be completed before the next race. No photos were taken off the crash.

NOTE: As in most other proxies, the team's worst race will be taken off when the entire race season is completed.


Congratulations to all the podium finishers and good luck to all for round 2 which will be run on a Carrera Plastic track also in Edmonton Alberta. Details of the venue will be posted soon.

Stock Class Winners

Image

1st Place (#21 Idle Time Racing)

Image

2nd Place (#13 Beast Lee)

Image

3rd Place #(18 Racer944)

Image

Modified Class Winners

Image

1st Place (#15 Midagekid1)

Image

2nd place (#27 Radarek)

Image

3rd Place (#17 SweatPea -was originally #7 but there were two same numbers in this class)

Image
Last edited by midagekid1 on Sat Apr 21, 2018 2:39 pm, edited 1 time in total.
User avatar
midagekid1
HRW SlotCar Veteran!
 
Posts: 203
Joined: Sun Oct 30, 2016 1:41 pm
Location: Edmonton, AB

Re: Round 1 Pioneer Endurance Proxy

Postby tin_indians » Sat Apr 21, 2018 12:12 am

:text-goodpost:

It brought a whole new meaning to the term, "drive it till the wheels fall off" :doh:
tin_indians
HRW SlotCar Veteran!
 
Posts: 162
Joined: Mon May 23, 2016 10:06 am
Location: Alberta, Canada

Re: Round 1 Pioneer Endurance Proxy

Postby vonsirius » Sat Apr 21, 2018 12:26 am

super cool track!
User avatar
vonsirius
HRW SlotCar Veteran!
 
Posts: 777
Joined: Mon Dec 24, 2012 12:47 am
Location: Catalonia, Europe

Re: Round 1 Pioneer Endurance Proxy

Postby Pepsi62 » Sat Apr 21, 2018 2:27 am

:o :o yep that's a rear wheel malfunction alright! onwards to round 2 and hope for abetter result
Pepsi62
HRW SlotCar Veteran!
 
Posts: 172
Joined: Sun Sep 09, 2012 12:37 am

Re: Round 1 Pioneer Endurance Proxy

Postby Brumos RSR » Sat Apr 21, 2018 8:41 am

Thanks for the run and congratulations to the podium builders. Thanks for hosting the round on such a wonderful track.
Brumos RSR
HRW SlotCar Veteran!
 
Posts: 1117
Joined: Sun Aug 03, 2014 2:58 pm

Re: Round 1 Pioneer Endurance Proxy

Postby arroldn » Sat Apr 21, 2018 2:45 pm

Tom,
Great track and reporting. Thanks to all the fellows who made this happen.
Stock class, what happened to my little Mustang? Did it hit the wall or something?
Modified class, We knew Dariusz would have a class car. Will SweatPea and I be fighting it out for 3rd place? Whales vs Minnows

Congratulations to all the podium finishers and all participants. Dale so far I'm 1 up on you.

Tune in proxy fans. Same proxy channel. Hope my cars can move up as the series continues.

Foul Foul Dariusz driver is not in a period correct helmet :lol: :D

Arrold
User avatar
arroldn
HRW SlotCar Veteran!
 
Posts: 1569
Joined: Thu Sep 06, 2012 12:26 pm
Location: Nashville TN

Re: Round 1 Pioneer Endurance Proxy

Postby eightwheels » Sat Apr 21, 2018 3:14 pm

#7 You picked a fine time to leave me louse wheel. That makes 2 proxy and 3 rims that have taken a hike. Put a new complete rear set on and now the front want some help. Well I see if we cane make 4 of a kind by the end of this one. :angry-tappingfoot: :angry-tappingfoot:
eightwheels
HRW SlotCar Veteran!
 
Posts: 169
Joined: Wed Oct 30, 2013 7:08 pm
Location: Idaho

Re: Round 1 Pioneer Endurance Proxy

Postby Beast Lee » Sat Apr 21, 2018 4:46 pm

Great job by all involved in this proxy...
I wish I was able to attend the race but at least I was able to qualify the cars, and I want to thank you all for that...
Our club certainly has made it's mark with our entries in this first round, but we should be good here, as this is the track we tuned our cars to... It's going to be interesting to see how they do in the rest of the series...
Congrats to all the podium finishers...

All the best...
Ron...
User avatar
Beast Lee
HRW SlotCar Veteran!
 
Posts: 640
Joined: Thu Aug 08, 2013 2:31 pm

Re: Round 1 Pioneer Endurance Proxy

Postby Radarek » Sat Apr 21, 2018 10:29 pm

Arrold

You have built a rocket, very punchy car, fastest pioneer we race Thursday. If Tom will post spread sheet you will see that your charger had quickest lap on every lane. Almost breaking 7 sec lap which is very good. It was a bit demanding on drivers side but I think it will progress well on other tracks, car to beat.

Congrats to podiumites in both classes.

Tom great work on reporting.

Regards
Radarek :banana-dance:
Radarek
HRW SlotCar Veteran!
 
Posts: 458
Joined: Sat Sep 10, 2016 6:00 pm

Re: Round 1 Pioneer Endurance Proxy

Postby arroldn » Sat Apr 21, 2018 11:04 pm

Dariusz,
My Charger was 2 laps down, did it de-slot? Not a good proxy car if it can't be driven. I think RichD said that in some post somewhere. Or I've heard it from other top finishing proxy racers.

Congratulations to you and great looking weathered Camaro.

Well let's just see how this plays out.

Arrold
User avatar
arroldn
HRW SlotCar Veteran!
 
Posts: 1569
Joined: Thu Sep 06, 2012 12:26 pm
Location: Nashville TN

Re: Round 1 Pioneer Endurance Proxy

Postby Aloha » Sun Apr 22, 2018 1:06 am

Congrats to the podium finishers.
Arroldn you got me in this Proxy as my car has Polynesian paralysis. Could never get the wheels and tires to work.you can see that I had to put aluminum tubing to anchor hubs. Honestly do not think they will-last the Proxy. Should have replaced whole set up.
The other builders have done a great job and should be commended.
Pioneer cars are beautifully made.
Enjoy everyone...Raderek cool paint job
Aloha
Dale
Aloha
HRW SlotCar Veteran!
 
Posts: 396
Joined: Sat Jan 03, 2015 4:45 pm

Re: Round 1 Pioneer Endurance Proxy

Postby Radarek » Sun Apr 22, 2018 6:19 am

Dale

That paint is a stock paint, one of the many available.

Arrold

With bit more weight or gearing ratio bit down your car would be unbeatable.
Yes we had a few deslots with the car, due to its unpredictability in corners(more weight needed or maybe longer braid) it doesn’t change the fact that it is rhe fastest of the hord.

:banana-dance:
Radarek
HRW SlotCar Veteran!
 
Posts: 458
Joined: Sat Sep 10, 2016 6:00 pm

Re: Round 1 Pioneer Endurance Proxy

Postby Slot GT » Sun Apr 22, 2018 2:40 pm

Awesome race recap guys. Great pictures.

Well done by the Edmonton crew.

Very interesting first round. I'm quite happy with the result of my car. :D
User avatar
Slot GT
HRW SlotCar Veteran!
 
Posts: 189
Joined: Fri Apr 01, 2016 1:59 am
Location: Edmonton, Alberta

Re: Round 1 Pioneer Endurance Proxy

Postby arroldn » Sun Apr 22, 2018 3:42 pm

Dariusz thanks for the comments. Currently not at home. I will have to check my file to see what the weight and gear ratio are. Good first round.

OK Home now. The car is heavy at 112 grams. Now the gear was a compromise. 13/33 2.53 I think I was out of 12 tooth pinions. This may explain why it doesn't have much brake.
User avatar
arroldn
HRW SlotCar Veteran!
 
Posts: 1569
Joined: Thu Sep 06, 2012 12:26 pm
Location: Nashville TN

Re: Round 1 Pioneer Endurance Proxy

Postby midagekid1 » Mon Apr 23, 2018 1:26 pm

Hi:

I added the entire excel spread sheets in attachments below of Round 1 of the Pioneer Proxy below for those interested.
User avatar
midagekid1
HRW SlotCar Veteran!
 
Posts: 203
Joined: Sun Oct 30, 2016 1:41 pm
Location: Edmonton, AB

Next

Return to Pioneer Endurance Car Proxy 2018



Who is online

Users browsing this forum: No registered users and 1 guest