First, I appreciate all the answers and information!
Harry, I will look at the Gator motor from SCC.
SuperSlab The motors I was asking about were the JK Products "Hawk MB Motor" - thats what is says on the packaging. I got them from a local commercial track as they were the tamest motors they had. I find that on my small track they run comparable with some pla fit Cheetah II motors I have. I asked about the Scaley motors because I'd like to try something even tamer - especially for the kids that race with us.
Application: I'm running on a 4 lane Carrera oval track, using primarily 1/32nd Womp chassis cars with a vacuum formed body. Here is a link to the thread about the track.
viewtopic.php?f=10&t=18790In addition to the Womp chassis cars, I also now have a couple 3D printed cars. The motors discussed above move the cars pretty good, but as I said, I'd like to see how they perform with a lesser motor like a stock scaley to see if that would help less experienced drivers. I know that they will have less torque, and may start off a little slower, but I'd like to try them.
Additionally, I'm curious if they would limit amp draw, but still perform enough to be fun. Currently, we're running with Carrera wall-wart power and its not enough for 3 cars let alone 4. I've been planning a power supply upgrade and talked with Harry about it. I'm concerned about how the power supply upgrade woud work with the 2.4ghz remote throttles because they are VERY nice and I hope not to lose them! So, I'm also wondering if the tamer motors would limit amp draw so we can run off of this power supply, but still be fast enough to be fun. I.E. slide through the corners with these heavier chassis.