Hi guys, Thanks for the feedback.
Dave, Yes I cast whitewall tires. Ive been casting whitewalls for 4 years or so now. I started making them as I couldn't get them anywhere. My first whitewalls were rather crude but my newest ones I'm super happy with. The white part of the tire is cast seperate. So the tire is in 2 parts & you glue it together. I use white tint for the white part, black tint for the black part.
A few photos below of one of my masters showing the tire in 2 parts to suit a narrowed H&R wheel. Ive spent a bit of time on this one. The H&R wheel is 1/24 & tires to suit are essentially 1/24 on a 1/25 car they looked to big for my 50s street cars. What Ive done is hollowed out the inside of a 1/25 tire so it fits on the H&R wheel. The white part is not hollowed out & covers the outer rim of the H&R wheel. When the wheel insert is inserted in the wheel it sits flush with the face of the tire, not the wheel. Hope that makes sense.
Its the same tire on the 41 Plymouth I finished recently