Hi all,
Thanks for the kind words!
@Lance and others:
First I tried to use the original wing with glued in transparant wing uprights. After 1 crash the wing was gone!
It was not possible to use the modified original wing. Very much too fragile.
So I have drawn a new wing and let it print by Shapeways in a transparant material.
The leds that I used are tiny ones : 1 by 0.5mm. With 0.27mm diam wires! From the model railroad shop!
In the wing uprights I left open holes and channels for the leds. Not very good to see in the pictures...
I do not know enough about the lights on the side of the car. It seems that it has to do something with the position
of the car in the race!? So you can't lit all lights for all the cars during the race. For this we need an electronics genius!
There must be a code for that. Someone knows?
Regards,
Gerrit
BTW : This car is also equipped with a Pipguide from Pipslot to slide with 4 wheels. more:
viewtopic.php?f=5&t=15836&p=186492&hilit=pipslot#p186492