Not very pretty, but it works.
SCC/CB Design 15x10 insert wheels on all 4 corners as well as Paul Gage 22125's.
Still a lot to do, but at least I have a start :)
ASA Camaro *Finished*
24 posts
• Page 1 of 2 • 1, 2
ASA Camaro *Finished*
by HomeRacingWorld » Mon Jul 07, 2014 8:13 pm
Decided to get this model off the shelf and onto the track.
Not very pretty, but it works.
SCC/CB Design 15x10 insert wheels on all 4 corners as well as Paul Gage 22125's.
Still a lot to do, but at least I have a start :)
Not very pretty, but it works.
SCC/CB Design 15x10 insert wheels on all 4 corners as well as Paul Gage 22125's.
Still a lot to do, but at least I have a start :)
-
HomeRacingWorld - HRW Janitor
- Posts: 15569
- Joined: Wed Aug 08, 2012 2:05 pm
- Location: HRW Skunkworks
Re: ASA Camaro coming along
by dge467 » Mon Jul 07, 2014 8:27 pm
Looks like your off to a good start!
-
dge467 - The King of Foil
- Posts: 3636
- Joined: Tue Sep 04, 2012 9:07 pm
- Location: N.E. Massachusetts
- oldtymer
- Cat Lovers Club Prez
- Posts: 403
- Joined: Mon Jun 17, 2013 4:50 pm
- Location: Willow Springs Illinois
Re: ASA Camaro coming along
by HomeRacingWorld » Tue Jul 08, 2014 6:32 am
Thanks guys. Going to use MT5 for power, standard 9/27 gearing.
-
HomeRacingWorld - HRW Janitor
- Posts: 15569
- Joined: Wed Aug 08, 2012 2:05 pm
- Location: HRW Skunkworks
Re: ASA Camaro coming along
by Florida_Slotter » Tue Jul 08, 2014 7:28 am
-
Florida_Slotter - Scratch Build Guru
- Posts: 1941
- Joined: Wed Sep 05, 2012 4:08 pm
- Location: Florida
Re: ASA Camaro coming along
by HomeRacingWorld » Tue Jul 08, 2014 7:31 am
I will measure it when I get home Marty. Cannot remember at the moment.
-
HomeRacingWorld - HRW Janitor
- Posts: 15569
- Joined: Wed Aug 08, 2012 2:05 pm
- Location: HRW Skunkworks
Re: ASA Camaro coming along
by HomeRacingWorld » Tue Jul 08, 2014 7:13 pm
Body mounts and gear installed for testing. The MT motor is my choice this time. Touch lower RPM's but the torque it has really punches this brass out of the corner.
Holes line up perfect. And you can see my sloppy soldering too.
Runs just fine. Needs some time on the Razor but overall a good runner.
Holes line up perfect. And you can see my sloppy soldering too.
Runs just fine. Needs some time on the Razor but overall a good runner.
-
HomeRacingWorld - HRW Janitor
- Posts: 15569
- Joined: Wed Aug 08, 2012 2:05 pm
- Location: HRW Skunkworks
Re: ASA Camaro coming along
by dreinecke » Tue Jul 08, 2014 8:11 pm
-
dreinecke - King of the Dum-Dums!
- Posts: 7360
- Joined: Wed Aug 08, 2012 5:39 pm
- Location: Colorado
Re: ASA Camaro coming along
by HomeRacingWorld » Thu Jul 10, 2014 6:56 pm
Getting there. Finished the inserts, made the body mount and base coat on.
-
HomeRacingWorld - HRW Janitor
- Posts: 15569
- Joined: Wed Aug 08, 2012 2:05 pm
- Location: HRW Skunkworks
Re: ASA Camaro coming along
by ListerStormGT » Fri Jul 11, 2014 5:44 am
Looking good Boss, like the color choice too. Funny how that looks right at home sitting on your oval. :D
-
ListerStormGT - HRW SlotCar Veteran!
- Posts: 1196
- Joined: Sun Sep 02, 2012 11:24 pm
- Location: Florida
Re: ASA Camaro coming along
by HomeRacingWorld » Fri Jul 11, 2014 6:38 am
Thanks guys. Truth is I stink at the painting part.
I am going for the mid season "raced hard and put away bent" look. Yes, that's it. Good excu...I mean good explanation.
I am going for the mid season "raced hard and put away bent" look. Yes, that's it. Good excu...I mean good explanation.
-
HomeRacingWorld - HRW Janitor
- Posts: 15569
- Joined: Wed Aug 08, 2012 2:05 pm
- Location: HRW Skunkworks
Re: ASA Camaro coming along
by oldtymer » Fri Jul 11, 2014 2:28 pm
- oldtymer
- Cat Lovers Club Prez
- Posts: 403
- Joined: Mon Jun 17, 2013 4:50 pm
- Location: Willow Springs Illinois
24 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 6 guests
Powered by phpBB® Forum Software © phpBB Group