better pictures of #75

[btaylor]

Finished my last SRP Midget today,still need to mount the exhaust and intake stacks. thought I would add a reference photo for size comparison. a lot of folks don't visualize just how small a 1/32 midget really is!
I cut the molded in driver out of this one and added a modified vintage nascar figure ,a dash,and interior.This scratch built chassis is based on the other three I have done,and im still sold on the pin configuration for these cars,it handles well and has plenty of slide through the corners!
Also made a slight change in the motor,i used a 7 volt unit in this one instead of the usual 9 volt.same physical size and I cant tell any difference in lap times
gearing remains the same 7/28. anyway,here are some more crappy pictures!

[HomeRacingWorld]

That is a little runner isn't it?

[munter]

I like that.....small is good.

[btaylor]

[btaylor]

i added a couple better pics of the midget cause i could not stand those blurry ones!

[HomeRacingWorld]

Those look really good sir, what a great finish on that.

[btaylor]