Home Racing World

I am looking for Silicones that will work on a 1/32 Womp Car for my Home track we wanting to start Dirt Car class , if anyone knows where i can get please LMK. Butterbean

Womp cars have 1/8th inch axles and the wheels and tires are really not 1/32nd scale. Your best bet is probably to coat the tires that came with the car with black silicone sealent. If you want to use regular 1/32nd silicone tires you will have to change to a 3/32nd rear axle assembly including the bearings, axle, crown gear and wheels.

Paul Gage sells urethane tires that work well on Womp hubs - that's what I use these days instead of silicon. I believe he's a sponser here so look on the HRW home page for the link. You can also coat your clean sponge tires with RTV silicon - it works best if you thin out the silicon with some mineral spirits.

pro track makes a set of silicones to fit womp axles at professor motor .910 diam

Permatex " Windshield and Glass Sealer" It's silicone, but a lot thinner than RTV. Coat the tires, and let it set up.Works well on painted wood tracks, I'd imagine it would do the same on a plastic track

I wan to say thanks for all the tip's and advice. Thanks again Butterbean