Home Racing World

Ok I'll take one.

Free Delivery right? :dance:

Yeah for you hand delivered if I can get a slotburger :banana-dance: :banana-dance:

Now that's a nice addition! Thanks, Jon.

Allan

Needed this for a while made a crazy tall inconsistent bracket for mine.

:text-goodpost: WOW :text-bravo:
Another great idea from the Razor Man. :text-bravo:
:text-thankyouyellow: :text-thankyouyellow: :text-thankyouyellow: :text-thankyouyellow: :text-thankyouyellow:

Thanks guys for all the kind words, I know most of us will never need this but for the perfectionist here you go

Nice addition! The razor has been the best investment in terms on how it has improved my slotracing (even here in NZ)!
I have a couple of suggestions:
- would it be possible to offer the indicator in metric units?
- would it be possible to have a stopper to set the min height that the axle can be moved down?
- finally, I usually sand one tyre at the time and I do not move the sanding pad: I just let the pad under the tyre until the tyre is completely trued. But with vibration and/or debris the sanding pad might not always sit flat on the truer. My suggestion here would be to have a profile in the slot where the pad sits, such that the pad can slide through but not vertical movement would be allowed...I know that this would require a complete redesign of the truer.
Sorry if it is a bit out of topic.

The first Indicator Brackets are on the way to SCC :music-rockout:

Hi John, cool product.
I presume that you sand the tire, then pull off and place under the indicator to check your size?
Maybe I'm thinking about it too much just trying to understand how I can use it on my Razor.
thanks.

Mike

No, the indicator sits on the "floor" of the Razor, but the body is attached to the block that raises and lowers it. As you lower the block (sand more off the tires), the gauge will reflect the change. When you finish off one tire, you write down what the gauge says. Then you sand down the second (and any subsequent) tire(s) until the gauge says the same thing that it did with the first tire. The result is two (or more) tires that have the same diameter after being trued, which is important for chassis balance and traction performance.

Allan

Thanks guys that cleared the god for me on operation.