Home Racing World

Hi fellas. It’s been a while....I just purchased a Pioneer mustang that will be ran on wood. I’m wanting to put a set of C.B. wheels on it and was wondering if anyone could give me some suggestions on the sizes that would work. And besides the basic tuning what other suggestions might you have...

I would but then on all 4 corners if I was you. there is a nice write up on the sight here is the link
Reviews/2015/PioneerCamaros/PioneerCamaros.html

Glue the axel bushings in place, coat tread of the Front tires with nail polish.
Loosen the body screws 1/4 turn and set the guide height so the front tire are
just touching the track but carry no weight, add 1/4 oz of weight behind the
from axel. This should get you going in the right direction.

All tuning done and ready for testing. I could actually fit 15x11 CB’s under the rear. We’ll see how she runs in a few days.

That's a great looking ride.

If you find it too tippy try going to a narrower rear tire/wheel.