guide blade for Revo slot cars
Posted: Wed Mar 13, 2019 2:27 pmHi does anybody know what the tap size is for Revo slot guide blade screw. Thanks Dennis Laff
Home Racing World
Your Slot Car Home On the Net!
http://www.homeracingworld.us/
guide blade for Revo slot cars
Page 1 of 1
Posted: Wed Mar 13, 2019 2:27 pmRe: guide blade for Revo slot cars
Posted: Wed Mar 13, 2019 4:26 pmDon't know but they measure an OD of 3.9mm with my calipers.
Re: guide blade for Revo slot cars
Posted: Wed Mar 13, 2019 5:08 pmWell the screw itself is 2.10 MM. The guide shaft is right about what Mr. Dog posted.
Just in case, there is another guide included with the cars in case you need a new one. You likely know that...just FYI in case.
Just in case, there is another guide included with the cars in case you need a new one. You likely know that...just FYI in case.
Re: guide blade for Revo slot cars
Posted: Wed Mar 13, 2019 6:06 pmI have the wider guide that came with the car but the screw won't go in it looks like it needs to be tapped .
Re: guide blade for Revo slot cars
Posted: Wed Mar 13, 2019 6:10 pmWell sir, actually it just needs pressure. More than usual. The screw will self tap into it.
Re: guide blade for Revo slot cars
Posted: Wed Mar 13, 2019 7:13 pmthanks i'll give I a try