Page 1 of 1
SCX Morgan Aero 8

Posted:
Fri Apr 05, 2019 6:01 pm
by frank9129
After some hard racing my car quit.
The guide is broken and the braid is missing.
This car was modified by Bruce. It is a real DaVols race car.
I have been trying to locate a replacement guide by SCX. All the guides I find have a pin to restrain the guide. Any idea where I can locate the proper guide?
Re: SCX Morgan Aero 8

Posted:
Fri Apr 05, 2019 6:05 pm
by noddaz
Any pictures of the underside of the car?
Re: SCX Morgan Aero 8

Posted:
Fri Apr 05, 2019 6:07 pm
by frank9129
No , but it has not been changed. Bruce was always changing to slim can motors.
It looks like the standard guide for SCX without the pin.
Re: SCX Morgan Aero 8

Posted:
Fri Apr 05, 2019 6:10 pm
by noddaz
I have one of those somewhere. Let me go look.
Re: SCX Morgan Aero 8

Posted:
Fri Apr 05, 2019 7:07 pm
by noddaz

Like that?
I will look for a spare if so.
Scott
Re: SCX Morgan Aero 8

Posted:
Fri Apr 05, 2019 8:48 pm
by frank9129
That's the one. See, there is no place for the pin.
Re: SCX Morgan Aero 8

Posted:
Sat Apr 06, 2019 12:20 am
by arroldn
I should have several SCX guides I will look in the morning. Not sure what you mean by the "pin".
Re: SCX Morgan Aero 8

Posted:
Sat Apr 06, 2019 12:55 pm
by lancelotalove
I think he means no pin like the SCX digital cars have. The SCX digital guide guides have a pin that lowers down in the center of the shaft to make the car change lanes.
The guide he needs is a standard guide.
Re: SCX Morgan Aero 8

Posted:
Sat Apr 06, 2019 3:01 pm
by frank9129
Spot on, you got it.
Thanks, Lancelotofhelp
Re: SCX Morgan Aero 8

Posted:
Sun Apr 07, 2019 1:49 pm
by noddaz