Page 1 of 1
Tires for this?
Posted:
Mon Jul 22, 2013 12:39 pmby litng1
What tires can I put on this chassis.Um unsure.
litng1 from Bardstown ky.
Re: Tires for this?
Posted:
Mon Jul 22, 2013 1:47 pmby munter
What diameter are the rims....on the centre section?
Might consider foam tires because of the rim type or some of Paul Gages Urethanes are for the rim with the raised lip at the edges.
Re: Tires for this?
Posted:
Mon Jul 22, 2013 1:56 pmby nhdungeonracer
Is that a Revell chassis?
Re: Tires for this?
Posted:
Mon Jul 22, 2013 2:07 pmby TsgtRet
Check with Tiny Motors, he does repop tires for Strom, Eldon, Revell etc. He also does Strom and Eldon replacement body parts and some cool repop bodies.
http://www.tinymotors.net/
Re: Tires for this?
Posted:
Mon Jul 22, 2013 5:28 pmby DHansen
E.J.'s Hobbies all so make tires that will fit them pt.# EJS16 GP tires. There real soft rubber, not silicone. The more you use them the better they grip. They measure 13/16 Dia. X 5/16 wide. Here is his link.
http://www.ejshobbies.com/index.htm
Re: Tires for this?
Posted:
Mon Jul 22, 2013 5:48 pmby litng1
Yes a revell chassis.Thanks guys
litng1 from Bardstown ky.
Re: Tires for this?
Posted:
Mon Jul 22, 2013 5:49 pmby litng1
Great info guys.
litng1 from Bardstown ky.
Re: Tires for this?
Posted:
Tue Jul 23, 2013 7:03 amby RichD
Super Tires has tires that fit a regular couble flange wheel, silicone and urethane versions are available in diameters from 0.750 to 0.840 inches.
Re: Tires for this?
Posted:
Tue Jul 23, 2013 12:45 pmby litng1
Found tires.Now how about a drop in motor and pinion for it?
litng1 from Bardstown ky.
Re: Tires for this?
Posted:
Fri Jul 26, 2013 10:02 pmby litng1
Looking for a motor and pinion.Any help?
litng1 from Bardstown ky.
Re: Tires for this?
Posted:
Sat Jul 27, 2013 5:59 pmby Smilin Ray
I have a couple different tires for Revell in urethane.
The motor in that Revell is ususally a grey/silver old style can. If you're still looking for one I'll check. Let me know.
Re: Tires for this?
Posted:
Sun Jul 28, 2013 9:17 amby Smilin Ray
I have one of these motors w/pinion, no wires. It measures 1.4". I've also seen a Revell chassis like this one that has a similar can but it measures a bit shorter. If your chassis needs the 1.4" motor message me.
Regards;
Re: Tires for this?
Posted:
Sun Jul 28, 2013 9:34 amby DHansen
E.J.'s all so has motors and pinons.
http://www.ejshobbies.com/index.htm
Re: Tires for this?
Posted:
Sun Jul 28, 2013 4:58 pmby litng1
Thanks again for the help guys
litng1 from Bardstown ky.
Re: Tires for this?
Posted:
Sun Jul 28, 2013 4:58 pmby litng1
Thanks again for the help guys
litng1 from Bardstown ky.