Racer Sideways Daytona Prototype wheel size...
Posted: Thu Oct 02, 2014 11:12 amJust what is the rear wheel size for these?
I am at work and do not have a car handy...
I am at work and do not have a car handy...
Home Racing World
Your Slot Car Home On the Net!
http://www.homeracingworld.us/
Racer Sideways Daytona Prototype wheel size...
Page 1 of 1
Posted: Thu Oct 02, 2014 11:12 amRe: Racer Sideways Daytona Prototype wheel size...
Posted: Thu Oct 02, 2014 11:32 am17x10
Re: Racer Sideways Daytona Prototype wheel size...
Posted: Thu Oct 02, 2014 12:26 pmThank you!
Re: Racer Sideways Daytona Prototype wheel size...
Posted: Thu Oct 02, 2014 2:37 pmYou are welcome.
One note, remember that the wheel inserts are 2 pieces. There is the chrome trim ring that must be pulled out first. You can use an exacto blade to gently pop them out.
One note, remember that the wheel inserts are 2 pieces. There is the chrome trim ring that must be pulled out first. You can use an exacto blade to gently pop them out.
Re: Racer Sideways Daytona Prototype wheel size...
Posted: Tue Oct 07, 2014 4:49 amAnother question...
These wheels would be the PA19-AL which are 17.3 x 9.75...?
And how does Slot.it figure their wheel sizing?
Thanks again..
These wheels would be the PA19-AL which are 17.3 x 9.75...?
And how does Slot.it figure their wheel sizing?
Thanks again..
Re: Racer Sideways Daytona Prototype wheel size...
Posted: Tue Oct 07, 2014 6:02 amRe: Racer Sideways Daytona Prototype wheel size...
Posted: Tue Oct 07, 2014 7:15 amI have a cheap caliper. Just found it confusing when measuring a 17x10 wheel is not actually 17mm x 10mm.
Maybe the wheel size refers to the full size cars actual wheel size..
Maybe the wheel size refers to the full size cars actual wheel size..