Home Racing World

The only thing I can tell you about the Kyosho track is what you get in the set is what you get! They don't sell any extra track or any different radius curves or lengths of straights. Not a good idea in my opinion. The cars are awesome though!!! Buy yourself a Carrera GO track, you'll be able to expand it....

I would be interested in your opinions on it!

i would be interested, too.
For no track pieces being available seperately - you can make an adapter to Go! track for sure and combine the 2 brands. I´ve seen adapters from artin to go! so it should be possible with Kyosho, too!
the cars are great.

I think that the Kyosho Circuit 96 track is actually 1/32 scale........at least that's my understanding. -gary

Retro,
That's a good idea the piece would need to be like a y or V shape for the grove start out with the go size and widen to the circuit 96 then paint it and lay on the cooper tape. or you could get a piece of MDF,or chip broad(aka particle broad) and have it at the same thickness.

Thanks for the pic, Bill!

Is there a lane changing piece available for DSlot? If yes, that piece can be used for the adapter. Just cut it where the where the slots have the right distance and hot glue it together. Put a piece of copper wire in the rails, solder, ready.
Can DSlot be connected to Ninco directly?
Shapeways would be the high $$$ solution, even in the cheapest material it will be serious money.