Slotcar rallying is proving to be very popular in 1/32 scale and I would very much like to do something similar in 1/43 scale.
This pilot is to gauge possible interest.
I am considering running a proxy on my 1/43 single lane rally track, 'Little Monte' some time later in 2014. The track can be seen at:
https://www.facebook.com/groups/532718610087823/ (scroll right down for photos). For those of a nervous disposition, scale height 2' walls are being added to the higher up bends at the moment!
The track is routed wood with copper tape, so traction magnets have no effect on there. My test cars were an old Artin Porsche and a Carrera GO Ford Focus rally car fitted with a swivel guide.
This track can be a challenge to get round as it has some very tight hairpin bends, but I have found that most cars can be made to get round it, best laps so far around 35 seconds.
The idea is to allow any car that has competed in the Monte Carlo Rally at some time, which includes most road cars ever made and some racers.
Fancy a go? Let me know what you think.
Regards, Lloyd