1968 Camaro Build
Posted: Fri Sep 21, 2018 10:31 pmGreat start. I can’t wait to see it finished.
Bruce
Page 1 of 1
Posted: Fri Sep 21, 2018 10:31 pmRe: 1968 Camaro Build
Posted: Sat Sep 22, 2018 6:07 amRe: 1968 Camaro Build
Posted: Sat Sep 22, 2018 6:13 pmI looked at that kit but chose a 67. Looking forward to seeing what you do with it.
Re: 1968 Camaro Build
Posted: Sat Sep 22, 2018 7:28 pmRe: 1968 Camaro Build
Posted: Sat Sep 22, 2018 7:51 pmI have built that car on an H&R chassis a few years back , it runs great.
I made mine into a modified. One thing i did was to add some strength by way of wire on the front pillars. Very similar to the article Harry posted for body strengthening.
That was the only weak point i found.
Looking good by the way.
Bob
I made mine into a modified. One thing i did was to add some strength by way of wire on the front pillars. Very similar to the article Harry posted for body strengthening.
That was the only weak point i found.
Looking good by the way.
Bob
Re: 1968 Camaro Build
Posted: Sat Sep 22, 2018 8:44 pmThanks for the tip Chappy, I'll have to find the video and give it a watch. It's also good to know the car has ran well on that chassis.
Re: 1968 Camaro Build
Posted: Mon Sep 24, 2018 11:08 pmThat looks fast sitting still!
Nice!
Nice!
Re: 1968 Camaro Build
Posted: Tue Sep 25, 2018 6:41 amOh yea! A great choice for a build. I did the 69 T/A Pontiac that is similar in size. it works pretty good on the H&R chassis. Looking forward to seeing the finished product!
Bob
Bob
Re: 1968 Camaro Build
Posted: Tue Sep 25, 2018 8:40 amHa, I'm building a 68 also. Starting in a week we will see how quick the build goes
Re: 1968 Camaro Build
Posted: Tue Sep 25, 2018 10:35 amI hope to get it built in time for the proxy. I know Bob can knock these out in a day but It’s been a little while since I’ve built a model and I can be kinda anal (which slows me down). Haha