Home Racing World

car I have always wanted-Nissan GTP, is now my first printed body (work in progress). I need advice on making windows please. (or links)

If you want a proper fit - You will need a vacuum forming machine and a plug/buck/mold to pull some clear sheet over.
If you can trim down the model to windscreen area - you are almost there once you print that for a plug.
The plug should include the two side windows and the inside of the roof - so you can glue it in - and the rest should pop into the window opening
I'd try to print that without the windows if you can..... Then you have the opening shape for the glass area etc...

Otherwise - You may find a clear plastic bottle that has almost the same curvature and trim it up to fit

Nice model BTW... Did you make it of find it?

Beer and painting don't mix!

Thanks....I printed it ......I dread the masking!
Where is that body from.

I made the body from semi-scratch in a CAD tool.... Projections from photos and drawings

great job!!

Ummm... IIRC in reality that car actually used a Porsche 962C windscreen, so... I would try a Slot.it clear parts pack for the 962C.

Peter

If Porsche 962 is the answer an old Scalextric 962 might make a good donor or at least a buck to vac form with.