Tiny Motors

1/32nd Scale Slot Car Forum
Discussions for 1/32nd Scale

Tiny Motors

Postby ddyke » Sun Feb 08, 2015 2:28 pm

Did Tiny Motors go belly up? If not, what is their link?
User avatar
ddyke
HRW SlotCar Veteran!
 
Posts: 602
Joined: Thu Aug 30, 2012 3:25 pm
Location: Cincinnati

Re: Tiny Motors

Postby TsgtRet » Sun Feb 08, 2015 4:26 pm

According to the last thing he posted: due to health problems he shut down his business. It's a shame because he was one of the few sources of Strom repop parts plus he had some nice silicones that had tread and good sidewall detail.
User avatar
TsgtRet
HRW SlotCar Veteran!
 
Posts: 2096
Joined: Thu Sep 06, 2012 11:32 pm
Location: Ft Bragg area of NC

Re: Tiny Motors

Postby dreinecke » Sun Feb 08, 2015 4:34 pm

Same story I've heard and it is a shame. I hope he's doing ok though...parts are replaceable.
User avatar
dreinecke
King of the Dum-Dums!
 
Posts: 7360
Joined: Wed Aug 08, 2012 5:39 pm
Location: Colorado

Re: Tiny Motors

Postby ddyke » Sun Feb 08, 2015 5:12 pm

His tires were the fastest on my wood skidpad - way faster than SlotIt N22s. I ripped one taking it off.
User avatar
ddyke
HRW SlotCar Veteran!
 
Posts: 602
Joined: Thu Aug 30, 2012 3:25 pm
Location: Cincinnati

Re: Tiny Motors

Postby ddyke » Sun Feb 08, 2015 5:49 pm

It would be nice to send him a message from the group wishing him the best.
User avatar
ddyke
HRW SlotCar Veteran!
 
Posts: 602
Joined: Thu Aug 30, 2012 3:25 pm
Location: Cincinnati

Re: Tiny Motors

Postby waaytoomuchintothis » Sun Feb 08, 2015 5:55 pm

We must have somebody here who can find an email or physical address, right?
User avatar
waaytoomuchintothis
"Seasoned SlotRacer"
 
Posts: 7576
Joined: Wed Aug 29, 2012 7:16 pm
Location: Chesterfield, Virginia

Re: Tiny Motors

Postby TsgtRet » Sun Feb 08, 2015 8:47 pm

I just sent a message to his old Ebay site, hopefully we'll get an answer.
User avatar
TsgtRet
HRW SlotCar Veteran!
 
Posts: 2096
Joined: Thu Sep 06, 2012 11:32 pm
Location: Ft Bragg area of NC

Re: Tiny Motors

Postby TsgtRet » Wed Feb 11, 2015 5:46 am

I got a response from Steve (Tiny Motors) at his ebay address (kenoshaki). He's in rough shape healthwise, but seems to be improving, albeit in, as he puts it "baby steps". Here's part of his response:

'Hi,
Good to hear from you. As the old cliché says, "I have my good days and bad days"...........

.........I've been re-teaching myself on the lathe and milling machine when I get up the steam and can handle the frustration of trying to remember what to do.
I am thinking (maybe wishful) of making several 1/32 kits. I would like to get into styrene injection molds instead of resin and silicone but it is quite expensive to go injection.
Oh well, I have to take baby steps anyway so maybe I can work my way into that over time. I was close before my lapse so I know it is not out of reach again.
I want to make better products with less time, effort and stress. But then that is the key isn't it. lol.
I'll be back, I just have a few obstacles in the way.
Thank you so much for writing, it means a lot. And tell the guys a HRW I said hi and keep 'em in the slot.
Very grateful,
Steve'
User avatar
TsgtRet
HRW SlotCar Veteran!
 
Posts: 2096
Joined: Thu Sep 06, 2012 11:32 pm
Location: Ft Bragg area of NC

Re: Tiny Motors

Postby btaylor » Wed Feb 11, 2015 6:22 am

That is great news! His stuff has saved many an old slot car from extinction!

Bob
User avatar
btaylor
Uncle Bob
 
Posts: 4519
Joined: Mon Mar 24, 2014 3:50 am

Re: Tiny Motors

Postby Hotrodbob » Fri Feb 20, 2015 12:33 pm

Steve has been a great help to me. Hope he returns to his former level of health.
User avatar
Hotrodbob
HRW SlotCar Veteran!
 
Posts: 180
Joined: Thu Sep 06, 2012 2:07 pm
Location: So.Cal.


Return to HRW 1/32nd Scale



Who is online

Users browsing this forum: Google [Bot] and 4 guests