What´s on your workbench right now?

[Datto]

The rims are 7.74mm dia X 6mm rear and 4.35mm front Overall diameter (wheel & tire is 13,6mm) These are totally experimental. I have no idea if they will stay on or hold together :)

These Datsuns ran 13 inch rims in the T/A series, so I thought I'd try and be scale accurate.

[pfuetze]

The 9mm rims on the Mini equal out to 10" wheels, scale accurate, too. The only way to fit them inside those tiny wheel wells ;)

[slothead]

Datto

Whoa! What is that adjustable chassis sitting beside the Camaro body?

That seems like a perfect solution for some 1/43 conversions I have in mind. Where can I get some?

Thanks for any info you can share.

Slothead

[Datto]

[dreinecke]

Two SCCA-inspired Carrera T-Birds awaiting my father to get healthy again, my own two 1968 Javelins to finish up, and about 40 other projects...

Those cars look great Datto!

[Broman62]

[pfuetze]

i got 2 of the red Minis on wednesday! great paintjob.
from the technical side they are still 100% artin... with all the pros and cons.

[Datto]

[LloydL]

Very smart Marc!

Regards, Lloyd

[pfuetze]

nice! gives plenty of room for a good drift!

[ddyke]

The bolts and tools to make a stand for my 350 lb. drill press. Now to cut the lumber.

[Cjent]

There is some rally great looking cars and projects on the table
Pictures from HPR ina couple of weeks :D !

[LloydL]

[pfuetze]

very nice Lloyd!
The windows are on the left side, just beside tje wheel inserts ;-)

[LloydL]

LOL Peter, you are probably right!

Regards, Lloyd