by chappy » Fri May 13, 2016 4:21 pm
OK guys here is the preliminary report on the cars.
I have only noted the cars with issues.
I will list the issue and you can let me know if you want it corrected. If not I will leave exactly as is.
Doc , your Chaparral has rear wing offand one strut broken loose from the wing not a running issue
The front wheels do lock up when the body floats over causing rub
Matt unfortunately your rear body panel is cracked free on the left side, it is causinga lot of body float which is resulting In. Extreme tire rub . Being a 3d print I can glue it to resolve the issue , but unsure of the best adhesive for it. Nice looking car though
Brumos you have a little rear tire rub on float, it may cause problems when cornering , may not . If need it does when testing on track would you like some float reduced at the rear body screw.
Bookie your front wheels dont even rotate freely , seems to be a huge amount of rub.
if it is supposed to be this way let me know, I havent had it on the set up block so it may not be an issue.
Keith. Your class p chappy has the entire fro not t guide and axle mount loose and floatin around .
it moves the guide and the tires rub , I can tighten the assembly up if you wish, I think it will definitely be a deslotting issue.
Mike your chappy has a bit of front tire rub , it might be ok when running but if not do you want the front body mount snugged a bit more.
All others are fine .
I will track test and qually them tomorrow during the rainstorm we are going to, get.
A good day to be Inside with slot cars.
Bob
Looks like a fair amount of damage. Maybe the cars need to be repackaged before sending them on to Keith(?)
Allan