Munter has dropped the cars off to me today
they are unpacked and lined up for qualifying
I will give them all a quick check over so they are ready to burn some laps
i will get the qualifying done over the next few days and I will confirm the race day date



3 lane routed mdf with 8mm deep slots
braided
track surface is semigloss enamel
approximately 28m lane lengths with 100mm lane spacings
has a slight squeeze on the back hair pin
mostly runs on 12volts but can be turned down to run on less for those extra hot cars
I use trackmate for the timing and race control

a good quick time for these type of cars is from 5.1 - 5.3 sec laps