HRW Land Speed & Drag fun run!

[Racie35]

Setting on the chassis

[Racie35]

You'll need a 1/32 body...but if you have tube type cars you can do a slingshot dragster easy enough. I just built one from brass,copying smaller one I had here. It's easier when you're not designing.
Post a few pics of what you're considering,and their chassis'

[TuscoTodd]

[Racie35]

Thanks for posting the links! Ole shotgun had em covered didn't he!

[TuscoTodd]

Yeah Dave's car was quick both out of the hole and on the top end - but similar to the regular racing, each car had it's own personalities and definitely made for some good entertainment! :)

REALLY looking forward to seeing what everyone enters in this! :D

[Racie35]

That traction deslot in the one video ....worrisome

[Racie35]

What gearing was it? Motor and tires too!

[TuscoTodd]

[TuscoTodd]

[btaylor]

This is going to be a good one!
Cant wait to see the cars in this race.

Bob

[Ky.Slot Racer]

[Racie35]

Yes but is there only one track being used in this fun run? All voltages will vary or no?
Cool your tests are going good, post us a video!

[btaylor]

Glad you had some good test time Mark! its nice to know you wont be flying off the track at fifty feet!
I got the tire issue fixed on my A class liner too, they were loosing shape badly, but not coming off.


Bob

[Racie35]

I can't answer your body question but there are only 2 allowed motors and the 40,000 hr isn't in each class....the other piranha all but the slingshot I believe because there's 2 classes of LSR. Both motors are under $10

[Ky.Slot Racer]

sounds a little big Dave, real car 54" wide so 1/32 scale should be around 1.68" i believe. I suppose that`s up to the originator of the fun run.