inner curve borders on HO scale tracks

[qball41]

I'm curious to learn what others have used for inner borders on turns on their HO scale layouts.

I would love to find something about a 1/4" that would be flexible so I could form it to the corner.

Any ideas you have seen used would be appreciated.

[vins123]

Hi

Tyco ever made some -- 5871-2 from u turn set, or
just go under ho AFX speedway from another member you will see some marvelous things
Sylvain

[BIG E]

Best to just cut the material to fit inside the corner, instead of trying to bend something around to fit. 1/4" masonite or corkboard painted black works well. I believe Brad Bowman is making aprons for HO sectional tracks, you'd have to check his website for actual details and availability. -- Ernie :>)

[Shadowracer]

Ho scale cork track bed (for trains) works great. It's flexible and pretty cheap too.

[qball41]

Cork roadbed is what I went with. It worked well. I'll post some pictures soon.

[mrstumpyHO]

I used Tomy track with O scale cork railroad roadbed because it was the right thickness for the track. On the inside of 6" radius curves the O scale was too wide and tough to bend right, so I stacked HO roadbed to get the right height. You can use card stock or poster board to shim the roadbed to the perfect level too.

Stumpy Stone :banana-dance: